Deliver toQatar
Car Emblem Badge for Infiniti Q50L QX50 QX30 QX60 Q70L QX70 FX35, Front Rear Trunk Self-Adhesive Side Sticker Decals Accessories

Description:

  • 【Applicable models】For Infiniti Q50L QX50 QX30 QX60 Q70L QX70 FX35
  • 【High-quality materials】Made of high-quality material, fine workmanship that does not fade, waterproof, texture clear, high gloss, with smooth hand feeling. does not damage the car paint and is durable. You can decorate your own car with this beautiful emblem yourself.
  • 【Feature】Car metal badge badge side sticker, exquisite design, make your car unique and get more attention. Durable and won't fall off after prolonged exposure to sunlight or rain.
  • 【Easy to Install】This is a self-adhesive emblem and no tools are required for installation. Clean the surface of your vehicle, make sure it is clean enough. Remove the protective film on the back, paste the logo and press it for about ten seconds. The installation is complete.
  • 【Notes】If you encounter any problems during use, you can contact us at any time. We will reply you within 24 hours and give you the best service.

  • 【】

    Product Name: Car Sticker

    Material: High quality materials

    【Features】

    1. Sturdy construction, wear-resistant, colorfast, will not damage car paint, durable.

    2. Add personality, luxury and elegance to your car.

    3. It provides an eye-catching show and personalizes your car.

    4. Self-adhesive installation is very easy. There is a super sticky backing on the back of the sticker, you just need to peel off the protective film and stick it in the right place.

    【Installation steps】

    1. Please keep the desired location clean and dry (flat position) before assembling this product.

    2. Remove the protective film from the adhesive tape at the bottom of the product.

    3. Stick the product to the desired location on the car. Press for about a minute.

    4. The installation is complete. Please keep the logo sticker dry for 48 hours after installation.

    【Note】

    1. Please allow slight dimensional differences due to different manual measurements.

    2. Due to the difference between different monitors, there may be slight color differences.

    Details:

    Car Emblem Badge for Infiniti Q50L QX50 QX30 QX60 Q70L QX70 FX35, Front Rear Trunk Self-Adhesive Side Sticker Decals Accessories

    Product ID: UO0S7KLZ21I
    |

    Returns & Warranty policies

    Imported From: United States

    At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.

    Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.

    Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.

    If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.

    Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.

    While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.

    Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.

    BOLO operates in accordance with the laws and regulations of Qatar. Any items found to be restricted or prohibited for sale within the Qatar will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Qatar are listed on our website.

    All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.

    All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.

    Car Emblem Badge for Infiniti Q50L QX50 QX30 QX60 Q70L QX70 FX35, Front Rear Trunk Self-Adhesive Side Sticker Decals Accessories

    Product ID: UO0S7KLZ21I
    Car Emblem Badge for Infiniti Q50L QX50 QX30 QX60 Q70L QX70 FX35, Front Rear Trunk Self-Adhesive Side Sticker Decals Accessories-0
    |

    Returns & Warranty policies

    Imported From: United States

    At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.

    Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.

    Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.

    If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.

    Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.

    While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.

    Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.

    BOLO operates in accordance with the laws and regulations of Qatar. Any items found to be restricted or prohibited for sale within the Qatar will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Qatar are listed on our website.

    All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.

    All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.

    Description:

  • 【Applicable models】For Infiniti Q50L QX50 QX30 QX60 Q70L QX70 FX35
  • 【High-quality materials】Made of high-quality material, fine workmanship that does not fade, waterproof, texture clear, high gloss, with smooth hand feeling. does not damage the car paint and is durable. You can decorate your own car with this beautiful emblem yourself.
  • 【Feature】Car metal badge badge side sticker, exquisite design, make your car unique and get more attention. Durable and won't fall off after prolonged exposure to sunlight or rain.
  • 【Easy to Install】This is a self-adhesive emblem and no tools are required for installation. Clean the surface of your vehicle, make sure it is clean enough. Remove the protective film on the back, paste the logo and press it for about ten seconds. The installation is complete.
  • 【Notes】If you encounter any problems during use, you can contact us at any time. We will reply you within 24 hours and give you the best service.

  • 【】

    Product Name: Car Sticker

    Material: High quality materials

    【Features】

    1. Sturdy construction, wear-resistant, colorfast, will not damage car paint, durable.

    2. Add personality, luxury and elegance to your car.

    3. It provides an eye-catching show and personalizes your car.

    4. Self-adhesive installation is very easy. There is a super sticky backing on the back of the sticker, you just need to peel off the protective film and stick it in the right place.

    【Installation steps】

    1. Please keep the desired location clean and dry (flat position) before assembling this product.

    2. Remove the protective film from the adhesive tape at the bottom of the product.

    3. Stick the product to the desired location on the car. Press for about a minute.

    4. The installation is complete. Please keep the logo sticker dry for 48 hours after installation.

    【Note】

    1. Please allow slight dimensional differences due to different manual measurements.

    2. Due to the difference between different monitors, there may be slight color differences.

    Details: