
Description:
Beatseal U-428+HV Automotive Urethane 10.5 Ounce / 310ml Cartridge Tube
Cures in 4 Hours as low as 32 Degrees Fahrenheit, as fast as 3 Hours in 50 Degrees Fahrenheit, relative to humidity.
**26:1 Thrust ratio professional caulk gun with wide nozzle head, or better is required to properly dispense product.
A Dow / Dupont Chemical OEM product For use on all Auto Glass Installations. Primerless Urethane - no primers to glass frit band is required. Meets all federal retention and roof crush tests.
If bare metal is exposed or urethane is to be applied to plastic or encapsulated parts then Dupont Betaprime 5504G or 5504GSA must be applied to those areas for safe adhesion.
*Professional Use Product* prior use of this product is required - failure to adhere to guidelines may result in improper installation which may include: leaks, air noises, or even serious injury.
Liability Waiver:
By purchasing this product, the buyer assumes full responsibility for its correct usage and application. The seller strongly recommends hiring a professional auto glass installer to ensure proper knowledge and handling of this product. The buyer agrees to release the seller and manufacturer from any liability related to the use and handling of this professional product. The buyer acknowledges that choosing to use this product independently, without the assistance of a professional as advised by the seller and manufacturer, may result in serious injury
Details:
Visit the Betaseal Store
U-428+ HV Fast Cure Auto Glass Urethane Adhesive - Primerless, 310ml (10.5oz) Cartridges (Cartridge, 10, Count)
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of Qatar. Any items found to be restricted or prohibited for sale within the Qatar will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Qatar are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
Share with
Or share with link
https://www.bolo.qa/products/UO0QY2UJPJL
Visit the Betaseal Store
U-428+ HV Fast Cure Auto Glass Urethane Adhesive - Primerless, 310ml (10.5oz) Cartridges (Cartridge, 10, Count)

Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of Qatar. Any items found to be restricted or prohibited for sale within the Qatar will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Qatar are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Beatseal U-428+HV Automotive Urethane 10.5 Ounce / 310ml Cartridge Tube
Cures in 4 Hours as low as 32 Degrees Fahrenheit, as fast as 3 Hours in 50 Degrees Fahrenheit, relative to humidity.
**26:1 Thrust ratio professional caulk gun with wide nozzle head, or better is required to properly dispense product.
A Dow / Dupont Chemical OEM product For use on all Auto Glass Installations. Primerless Urethane - no primers to glass frit band is required. Meets all federal retention and roof crush tests.
If bare metal is exposed or urethane is to be applied to plastic or encapsulated parts then Dupont Betaprime 5504G or 5504GSA must be applied to those areas for safe adhesion.
*Professional Use Product* prior use of this product is required - failure to adhere to guidelines may result in improper installation which may include: leaks, air noises, or even serious injury.
Liability Waiver:
By purchasing this product, the buyer assumes full responsibility for its correct usage and application. The seller strongly recommends hiring a professional auto glass installer to ensure proper knowledge and handling of this product. The buyer agrees to release the seller and manufacturer from any liability related to the use and handling of this professional product. The buyer acknowledges that choosing to use this product independently, without the assistance of a professional as advised by the seller and manufacturer, may result in serious injury
Details:
Similar suggestions by Bolo
Share with
Or share with link
https://www.bolo.qa/products/UO0QY2UJPJL