Deliver toQatar
BIQU CryoGrip Pro Frostbite for Bambu-Lab P1S/P1P/P2S/X1C/X1E/X2D/A1 257x257mm Cold Build Plate Room Temperature Print Double Sided Upgrade Plate Removable Surface Platform

Description:

  • Perfect Compatibility: CryoGrip Pro Frostbite Panda Build Plate is compatible with Bambu-Lab P1S, P1P, P2S, X1C, X1E, X2D, A1 3D printers. An AR code is included on the build plate to ensure it is recognized by the X1C, eliminating setup errors for a hassle-free printing experience. NOTE: If you are using P2S, please close the build plate printing detection
  • Room-Temp Printing: PLA filament can be printed at indoor temperature and provide ultra strong adhesion, with a temperature range of only 30-50℃, saving heating bed time, Eco-Friendly, 50% Power reduction. It can also be used for PETG filament (50-70℃) and ABS filament (100℃), saving heating bed time, hourly power saving 50W/h and clog free
  • Unparalleled Adhesion and Zero Heat Generation: CryoGrip Pro Frostbite Panda Build Plate has unparalleled first layer adhesion. The substrate has high magnetism, strong adsorption and fixation, and limits stress warping, so there is no need to worry about printing failure caused by the first layer falling off, greatly improving the printing success rate. Designed to safely protect your printing at room temperature. Enjoy perfect printing effect without warping
  • Easy to Removable: The printed model can be disassembled without the need for other tools; After bending, the steel plate can return to a flat state. After prolonged use, wiping with clean water can easily restore the new adhesive effect
  • Special Material Texture Printing: CryoGrip Pro frostbite Cold Build Plate sandwiched with 7 layers of cobalt oxide coating, consisting of Base Plate, Base Coat, Intermediate Coating, and Top Coat. The base coat and intermediate coating are respectively a highly active adhesion layer and an ice blue ultra-high temperature light cured sintered layer, bring Impact resistant, Corrosion Resistant, Long life span.zero risk of repeated bending causing coating to peel off
  •  

    What's in the box

  • BIQU CryoGrip Pro Frostbite Cold Build Plate 257x257mm
  • Details:

    BIQU CryoGrip Pro Frostbite for Bambu-Lab P1S/P1P/P2S/X1C/X1E/X2D/A1 257x257mm Cold Build Plate Room Temperature Print Double Sided Upgrade Plate Removable Surface Platform

    Product ID: UO0Q9LUUGAC
    |

    Returns & Warranty policies

    Imported From: United States

    At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.

    Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.

    Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.

    If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.

    Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.

    While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.

    Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.

    BOLO operates in accordance with the laws and regulations of Qatar. Any items found to be restricted or prohibited for sale within the Qatar will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Qatar are listed on our website.

    All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.

    All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.

    Product details by manufacturer
    Product details by manufacturer
    Product details by manufacturer

    Filament Compatibility Chart

    • HT: Heatbed Temperature

    FMRT: Filament Manufacturer Recommended Heatbed Temperature AFMRT: May require temperatures Above Filament Manufacturer Recommended Heatbed Temperature

    • AAR: Adhesion Aid Reccomendation

    NAR: No Adhesive Required MRA: May Require Adhesive depending on filament

    AR: Adhesive Reccomended

    Product details by manufacturer

    Which plate is right for you?

    GSI: Grip Strength Index (Rated form worst to best on a scale form 1-10)

    Brim Sstting recommendation

    • 1-6 (OK adhesion) : Highly recommended to use brim
    • 7-8 (Good adhesion) : Brim not needed, But if your print is particularly hard to print, use brim to improve adhesion. If only odd corners are lifting, use mouse ear pads on the corner
    • 9-10 (Extremely Good adhesion) : Do Not Use Brim unless your part is extremely small or prone to warping; single-layer brim will be hard to clean off of the plate
    Product details by manufacturer
    Product details by manufacturer

    Effortless Print Removal

    Simply bend the surface slightly, and your finished print detaches cleanly without the need for scraping or prying tools.

    Product details by manufacturer

    Textured Suface finish

    BIQU Panda Build Plate CryoGrip Pro Frostbite allows your printer to display Frostbite texture at the bottom for a better printing experience.

    Similar suggestions by Bolo

    More from this brand

    Similar items from “3D Printer Accessories”

    BIQU CryoGrip Pro Frostbite for Bambu-Lab P1S/P1P/P2S/X1C/X1E/X2D/A1 257x257mm Cold Build Plate Room Temperature Print Double Sided Upgrade Plate Removable Surface Platform

    Product ID: UO0Q9LUUGAC
    BIQU CryoGrip Pro Frostbite for Bambu-Lab P1S/P1P/P2S/X1C/X1E/X2D/A1 257x257mm Cold Build Plate Room Temperature Print Double Sided Upgrade Plate Removable Surface Platform-0
    |

    Returns & Warranty policies

    Imported From: United States

    At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.

    Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.

    Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.

    If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.

    Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.

    While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.

    Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.

    BOLO operates in accordance with the laws and regulations of Qatar. Any items found to be restricted or prohibited for sale within the Qatar will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Qatar are listed on our website.

    All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.

    All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.

    Description:

  • Perfect Compatibility: CryoGrip Pro Frostbite Panda Build Plate is compatible with Bambu-Lab P1S, P1P, P2S, X1C, X1E, X2D, A1 3D printers. An AR code is included on the build plate to ensure it is recognized by the X1C, eliminating setup errors for a hassle-free printing experience. NOTE: If you are using P2S, please close the build plate printing detection
  • Room-Temp Printing: PLA filament can be printed at indoor temperature and provide ultra strong adhesion, with a temperature range of only 30-50℃, saving heating bed time, Eco-Friendly, 50% Power reduction. It can also be used for PETG filament (50-70℃) and ABS filament (100℃), saving heating bed time, hourly power saving 50W/h and clog free
  • Unparalleled Adhesion and Zero Heat Generation: CryoGrip Pro Frostbite Panda Build Plate has unparalleled first layer adhesion. The substrate has high magnetism, strong adsorption and fixation, and limits stress warping, so there is no need to worry about printing failure caused by the first layer falling off, greatly improving the printing success rate. Designed to safely protect your printing at room temperature. Enjoy perfect printing effect without warping
  • Easy to Removable: The printed model can be disassembled without the need for other tools; After bending, the steel plate can return to a flat state. After prolonged use, wiping with clean water can easily restore the new adhesive effect
  • Special Material Texture Printing: CryoGrip Pro frostbite Cold Build Plate sandwiched with 7 layers of cobalt oxide coating, consisting of Base Plate, Base Coat, Intermediate Coating, and Top Coat. The base coat and intermediate coating are respectively a highly active adhesion layer and an ice blue ultra-high temperature light cured sintered layer, bring Impact resistant, Corrosion Resistant, Long life span.zero risk of repeated bending causing coating to peel off
  •  

    What's in the box

  • BIQU CryoGrip Pro Frostbite Cold Build Plate 257x257mm
  • Details:

    Product details by manufacturer
    Product details by manufacturer
    Product details by manufacturer

    Filament Compatibility Chart

    • HT: Heatbed Temperature

    FMRT: Filament Manufacturer Recommended Heatbed Temperature AFMRT: May require temperatures Above Filament Manufacturer Recommended Heatbed Temperature

    • AAR: Adhesion Aid Reccomendation

    NAR: No Adhesive Required MRA: May Require Adhesive depending on filament

    AR: Adhesive Reccomended

    Product details by manufacturer

    Which plate is right for you?

    GSI: Grip Strength Index (Rated form worst to best on a scale form 1-10)

    Brim Sstting recommendation

    • 1-6 (OK adhesion) : Highly recommended to use brim
    • 7-8 (Good adhesion) : Brim not needed, But if your print is particularly hard to print, use brim to improve adhesion. If only odd corners are lifting, use mouse ear pads on the corner
    • 9-10 (Extremely Good adhesion) : Do Not Use Brim unless your part is extremely small or prone to warping; single-layer brim will be hard to clean off of the plate
    Product details by manufacturer
    Product details by manufacturer

    Effortless Print Removal

    Simply bend the surface slightly, and your finished print detaches cleanly without the need for scraping or prying tools.

    Product details by manufacturer

    Textured Suface finish

    BIQU Panda Build Plate CryoGrip Pro Frostbite allows your printer to display Frostbite texture at the bottom for a better printing experience.

    Similar suggestions by Bolo

    More from this brand

    Similar items from “3D Printer Accessories”