Deliver toQatar
Eastwood Benchtop Mini Fabrication Metal Milling Machine 4 Inch x 16 Inch, 3/4 HP

Description:

  • Home Workshop Friendly Size
  • Accurately, Slot, Drill, Chamfer, Bevel, Face and Plunge Cut
  • Tilting Column Allows for Accurate Angle Work
  • Large R8 Taper Accommodates Common Tooling
  • 3/4 Horsepower Motor - 0-2500 RPM Motor Control with a 2 Speed Gearbox
  • With The Eastwood 4" X 16" Mini Mill You will be able to accomplish projects that simply are not possible without a milling machine. Now you can accurately Slot, Drill, Chamfer, Bevel, Face and Plunge Cut with this one machine. The tilting column allows for accurate angle work to be done and the Large R8 Taper accommodates common tooling. We've even included an 3/8" Collet and end mill so you can begin machining right out of the box!

    The Eastwood 4” X 16” Mini Mill is a highly capable machine able to perform as a Drill Press with up to 1/2” [13mm] drill shank capacity and as a fully functional manual Milling Machine with up to 5/8” end mill capacity (3/8” included). The 2 axis Table, along with a 45° left or right tilting column design, allows drilling or milling virtually any surface. A 0-2500 RPM Motor Control with a 2 Speed gearbox provides the versatility to accommodate most materials. The standard R8 Taper arbor will accept a wide variety of Collets, Drills and other accessories.

    Specifications

    Spindle Travel: 5 inches
    Swing: 12-3/4 inches
    Longitudinal Table Travel: 7-5/16 inches
    Cross Table Travel: 4 inches
    Head Travel: 7-1/2 inches
    Head Tilt: Left and Right 45 deg
    Maximum Distance Spindle to Column: 6-3/8 inches
    Maximum Distance Spindle to Table: 11-1/2 inches
    Drilling Cap for Steel: 5/8 inch
    Range of Vertical Spindle Speeds: 0 – 1100, 0 – 2500 RPM
    Quill Dial: 1.580 inch
    Table Length: 15-3/4 inches
    Table Width: 3-5/8 inches
    Number Of T Slots: 3
    T Slots Width: 0.465 inch
    T Slots Height: 5/8"
    T Slots Centers: 1-1/8 inches
    Stud Size: 5/8 inch
    Spindle Taper: R8
    End Milling Cap: 1/2 inch
    Face Milling Cap: 1-1/8 inches
    Draw Bar Diameter: 12 mm
    Draw Bar TPI: 7/16" x 20
    Draw Bar Length: 4 inches
    Spindle Bearings: Permanently Sealed Ball Bearings

    Details:

    Eastwood Benchtop Mini Fabrication Metal Milling Machine 4 Inch x 16 Inch, 3/4 HP

    Product ID: UO0OCPLZ6F2
    |

    Returns & Warranty policies

    Imported From: United States

    At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.

    Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.

    Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.

    If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.

    Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.

    While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.

    Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.

    BOLO operates in accordance with the laws and regulations of Qatar. Any items found to be restricted or prohibited for sale within the Qatar will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Qatar are listed on our website.

    All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.

    All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.

    Similar suggestions by Bolo

    More from this brand

    Similar items from “Milling Machines”

    Eastwood Benchtop Mini Fabrication Metal Milling Machine 4 Inch x 16 Inch, 3/4 HP

    Product ID: UO0OCPLZ6F2
    Eastwood Benchtop Mini Fabrication Metal Milling Machine 4 Inch x 16 Inch, 3/4 HP-0
    |

    Returns & Warranty policies

    Imported From: United States

    At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.

    Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.

    Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.

    If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.

    Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.

    While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.

    Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.

    BOLO operates in accordance with the laws and regulations of Qatar. Any items found to be restricted or prohibited for sale within the Qatar will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Qatar are listed on our website.

    All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.

    All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.

    Description:

  • Home Workshop Friendly Size
  • Accurately, Slot, Drill, Chamfer, Bevel, Face and Plunge Cut
  • Tilting Column Allows for Accurate Angle Work
  • Large R8 Taper Accommodates Common Tooling
  • 3/4 Horsepower Motor - 0-2500 RPM Motor Control with a 2 Speed Gearbox
  • With The Eastwood 4" X 16" Mini Mill You will be able to accomplish projects that simply are not possible without a milling machine. Now you can accurately Slot, Drill, Chamfer, Bevel, Face and Plunge Cut with this one machine. The tilting column allows for accurate angle work to be done and the Large R8 Taper accommodates common tooling. We've even included an 3/8" Collet and end mill so you can begin machining right out of the box!

    The Eastwood 4” X 16” Mini Mill is a highly capable machine able to perform as a Drill Press with up to 1/2” [13mm] drill shank capacity and as a fully functional manual Milling Machine with up to 5/8” end mill capacity (3/8” included). The 2 axis Table, along with a 45° left or right tilting column design, allows drilling or milling virtually any surface. A 0-2500 RPM Motor Control with a 2 Speed gearbox provides the versatility to accommodate most materials. The standard R8 Taper arbor will accept a wide variety of Collets, Drills and other accessories.

    Specifications

    Spindle Travel: 5 inches
    Swing: 12-3/4 inches
    Longitudinal Table Travel: 7-5/16 inches
    Cross Table Travel: 4 inches
    Head Travel: 7-1/2 inches
    Head Tilt: Left and Right 45 deg
    Maximum Distance Spindle to Column: 6-3/8 inches
    Maximum Distance Spindle to Table: 11-1/2 inches
    Drilling Cap for Steel: 5/8 inch
    Range of Vertical Spindle Speeds: 0 – 1100, 0 – 2500 RPM
    Quill Dial: 1.580 inch
    Table Length: 15-3/4 inches
    Table Width: 3-5/8 inches
    Number Of T Slots: 3
    T Slots Width: 0.465 inch
    T Slots Height: 5/8"
    T Slots Centers: 1-1/8 inches
    Stud Size: 5/8 inch
    Spindle Taper: R8
    End Milling Cap: 1/2 inch
    Face Milling Cap: 1-1/8 inches
    Draw Bar Diameter: 12 mm
    Draw Bar TPI: 7/16" x 20
    Draw Bar Length: 4 inches
    Spindle Bearings: Permanently Sealed Ball Bearings

    Details:

    Similar suggestions by Bolo

    More from this brand

    Similar items from “Milling Machines”