
Description:
π’ LOW SHRINK GRAY RUBBER LABEL AKRON PRE-CUT
π’ Pre-Cut SIZE 1-7/8" x 2-7/8" x 1/8" THICK
π’ PACK OF 10 READY CUT - JEWELRY MOLD MAKING
π’ Akron Rubber is made by Zero-D Products in Akron Ohio, the polymer capital of the world.
π’ The Akron mold rubbers deliver controlled shrinkage, excellent cutting qualities, high tear resistance and elongation, and excellent fill and detail reproduction.
π’ The production formulations of the mold material contain certain waxes, oils and antioxidants, thus the molds made with the Akron will provide many years of production life.
π’ Modern chemistry permits an uncured shelf life of 7 years or more, finished life of over 20 years.
π’ The Low Shrink Gray is a Premium rubber that has a 40 Durometer, is perfect for molds where Extra Firmness and Minimal Shrink is required.
π’ It is especially suited for fine and detailed models.
π’ The mold material will never encounter variations in hardness or shrinkage.
π’ Low Shrink Gray rubber vulcanizing Temperature of 310oF β Vulcanizer must be Calibrated Correctly and Pre-heated prior to making the mold.
π’ NOTE: Pre-heat Vulcanizer to 310oF once it is ready vulcanizing time is 7 Β½ minutes per 1/8"
π’ The vulcanzing recommended temperature is 310oF, the temperature and time may be varied to suit your needs and experience...however do not exceed 325oF / 163oC
π’ ***To produce good quality Molds... Always pack an extra layer of Mold Material (Example 1/2" thick Mold Frame will take 4 slices of 1/8" + 1 Extra layer = total 5)
π’ The 5 pound package is enough to make 20-25 standard sized molds, depending on the thickness of the mold.
π» SPECIFICATIONS: JETS Product # 1309-9710 x10π»
πΈ Each Ready Cut Piece Measures: 1-7/8" x 2-7/8" x 1/8" thick
πΈ 310Β°F (154Β°C) - 7 Β½ minutes per 1/8 inch β (Vulcanizer must be Calibrated Correctly).
πΈ Gray rubber has a Dark Blue polyethylene cover
πΈ SALE is for Ready-Cut 10 Pieces
Details:
Visit the JTS Store
Akron Mold Rubber Low Shrink Gray Label Pre-Cut Jewelry Wax Injection Mold for Jewelry Making, Mold Making and Vulcanizing, Pre-Cut Size 1-7/8" x 2-7/8" x 1/8" Thick Made in USA
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of Qatar. Any items found to be restricted or prohibited for sale within the Qatar will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Qatar are listed on our website.
All items are shipped by air, and any products classified as βDangerous Goods (DG)β under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
Share with
Or share with link
https://www.bolo.qa/products/UO0O5UDDF1I
Visit the JTS Store
Akron Mold Rubber Low Shrink Gray Label Pre-Cut Jewelry Wax Injection Mold for Jewelry Making, Mold Making and Vulcanizing, Pre-Cut Size 1-7/8" x 2-7/8" x 1/8" Thick Made in USA

Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of Qatar. Any items found to be restricted or prohibited for sale within the Qatar will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Qatar are listed on our website.
All items are shipped by air, and any products classified as βDangerous Goods (DG)β under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
π’ LOW SHRINK GRAY RUBBER LABEL AKRON PRE-CUT
π’ Pre-Cut SIZE 1-7/8" x 2-7/8" x 1/8" THICK
π’ PACK OF 10 READY CUT - JEWELRY MOLD MAKING
π’ Akron Rubber is made by Zero-D Products in Akron Ohio, the polymer capital of the world.
π’ The Akron mold rubbers deliver controlled shrinkage, excellent cutting qualities, high tear resistance and elongation, and excellent fill and detail reproduction.
π’ The production formulations of the mold material contain certain waxes, oils and antioxidants, thus the molds made with the Akron will provide many years of production life.
π’ Modern chemistry permits an uncured shelf life of 7 years or more, finished life of over 20 years.
π’ The Low Shrink Gray is a Premium rubber that has a 40 Durometer, is perfect for molds where Extra Firmness and Minimal Shrink is required.
π’ It is especially suited for fine and detailed models.
π’ The mold material will never encounter variations in hardness or shrinkage.
π’ Low Shrink Gray rubber vulcanizing Temperature of 310oF β Vulcanizer must be Calibrated Correctly and Pre-heated prior to making the mold.
π’ NOTE: Pre-heat Vulcanizer to 310oF once it is ready vulcanizing time is 7 Β½ minutes per 1/8"
π’ The vulcanzing recommended temperature is 310oF, the temperature and time may be varied to suit your needs and experience...however do not exceed 325oF / 163oC
π’ ***To produce good quality Molds... Always pack an extra layer of Mold Material (Example 1/2" thick Mold Frame will take 4 slices of 1/8" + 1 Extra layer = total 5)
π’ The 5 pound package is enough to make 20-25 standard sized molds, depending on the thickness of the mold.
π» SPECIFICATIONS: JETS Product # 1309-9710 x10π»
πΈ Each Ready Cut Piece Measures: 1-7/8" x 2-7/8" x 1/8" thick
πΈ 310Β°F (154Β°C) - 7 Β½ minutes per 1/8 inch β (Vulcanizer must be Calibrated Correctly).
πΈ Gray rubber has a Dark Blue polyethylene cover
πΈ SALE is for Ready-Cut 10 Pieces
Details:
Similar suggestions by Bolo
Share with
Or share with link
https://www.bolo.qa/products/UO0O5UDDF1I