
Description:
Kindly Note
1. The default protocol of this drone and the remote controller are the Frsky D8, both of them cannot bind with other receiver or the controller has different protocol like the ELRS protocol. Please do not use the other device is the ELRS protocol to bind with the drone and the remote controller come from this kit
2. The remote controller supports to change protocols Frsky FCC D16, Frsky LBT D16, Frsky D8, or Futaba S-FHSS, pilots have to power it off first, then press and hold the bind button while you power it back on. After that, the flash times of the red LED before buzzer alarms will change, and it will indicate which protocol it is on. The LED status how to match the protocol version. Please refer to the user manual
3. Turtle mode will not work effectively if something gets stuck in the motor/prop. Please push down the switch SD on the transmitter immediately in this situation to exit turtle mode
4. The propellers in the package were modified from three holes to one hole
Item: Cetus Pro FPV Kit
Receiver protocol: Frsky D8
Quad: Cetus Pro Brushless Quadcopter
Flight controller: Lite 1-2S Pro brushless FC
VTX: 25mW
Camera: C02 FPV Micro Camera
Transmitter: LiteRadio2 SE Transmitter
TX mode: Mode 1 & Mode 2 optional
Goggles: VR02 Goggles
Motor: 1102-18000KV Brushless motor
Propeller: 40mm 3-blade 1.5mm shaft hole
Power system: 1S
Battery*: BT2.0 450mAh 1S 75C Battery
Flight time: 4-5min
Flight distance: 80m (in wide & undisturbed environment)
Package
1 * Cetus Pro Brushless Quadcopter
1 * LiteRadio2 SE Transmitter (Frsky D8 Protocol)
1 * VR02 FPV Goggles
2 * BT2.0 450mAh 1S 75C Battery
1 * BT2.0 Battery Charger and Voltage Tester
1 * USB Charging Cable (Type-C)
1 * Type-C Adapter
1 * Prop Removal Tool
4 * 40mm 3-blade Props
2 * User Manual
1 * Portable Storage Bag
1 * Phillips Screwdriver
Details:
Visit the BETAFPV Store
BETAFPV Cetus Pro FPV Kit with 3 Flight Modes Altitude Hold Emergency Landing Self Protection Turtle Mode, with LiteRadio 2 SE Transmitter VR02 Goggles Ready to Flight Easy for FPV Beginners
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of Qatar. Any items found to be restricted or prohibited for sale within the Qatar will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Qatar are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
Share with
Or share with link
https://www.bolo.qa/products/UO09OWCAOJW
Visit the BETAFPV Store
BETAFPV Cetus Pro FPV Kit with 3 Flight Modes Altitude Hold Emergency Landing Self Protection Turtle Mode, with LiteRadio 2 SE Transmitter VR02 Goggles Ready to Flight Easy for FPV Beginners

Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of Qatar. Any items found to be restricted or prohibited for sale within the Qatar will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Qatar are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Kindly Note
1. The default protocol of this drone and the remote controller are the Frsky D8, both of them cannot bind with other receiver or the controller has different protocol like the ELRS protocol. Please do not use the other device is the ELRS protocol to bind with the drone and the remote controller come from this kit
2. The remote controller supports to change protocols Frsky FCC D16, Frsky LBT D16, Frsky D8, or Futaba S-FHSS, pilots have to power it off first, then press and hold the bind button while you power it back on. After that, the flash times of the red LED before buzzer alarms will change, and it will indicate which protocol it is on. The LED status how to match the protocol version. Please refer to the user manual
3. Turtle mode will not work effectively if something gets stuck in the motor/prop. Please push down the switch SD on the transmitter immediately in this situation to exit turtle mode
4. The propellers in the package were modified from three holes to one hole
Item: Cetus Pro FPV Kit
Receiver protocol: Frsky D8
Quad: Cetus Pro Brushless Quadcopter
Flight controller: Lite 1-2S Pro brushless FC
VTX: 25mW
Camera: C02 FPV Micro Camera
Transmitter: LiteRadio2 SE Transmitter
TX mode: Mode 1 & Mode 2 optional
Goggles: VR02 Goggles
Motor: 1102-18000KV Brushless motor
Propeller: 40mm 3-blade 1.5mm shaft hole
Power system: 1S
Battery*: BT2.0 450mAh 1S 75C Battery
Flight time: 4-5min
Flight distance: 80m (in wide & undisturbed environment)
Package
1 * Cetus Pro Brushless Quadcopter
1 * LiteRadio2 SE Transmitter (Frsky D8 Protocol)
1 * VR02 FPV Goggles
2 * BT2.0 450mAh 1S 75C Battery
1 * BT2.0 Battery Charger and Voltage Tester
1 * USB Charging Cable (Type-C)
1 * Type-C Adapter
1 * Prop Removal Tool
4 * 40mm 3-blade Props
2 * User Manual
1 * Portable Storage Bag
1 * Phillips Screwdriver
Details:
Similar suggestions by Bolo
Share with
Or share with link
https://www.bolo.qa/products/UO09OWCAOJW