Description:
Measurement Range: 0~1100 NTU/FNU, 0~275EBC, 0~9999 ASBC
Resolution: 0.01(0~100 NTU), 0.1 (100~999NTU), 1 (999~1100 NTU)
Accuracy: ±2%(0~500 NTU), ±3% (501~1100NTU)
Default Calibration Standards: 0.02 NTU,200 NTU, 500 NTU, 1000 NTU or User-Defined
Light Source: Infrared-emitting diode (850nm wave length)
Detector: Silicon Photodiode
Stray Light:
Sample Vials: 60(H)×25(Dia)mm
Power Off: Manualor Automatic (15 minutes)
Reset Function: Yes
Memory: Stores up to 100 data sets
Output: USB Communication Interface
Operating Temperature: 0~60°C
Important Notes for Measurement and Calibration:
Do not hold the meter in the hand during measurement and calibration.
Glass vials and caps must be cleaned thoroughly with deionised water after each measurement. Minor residuals can cause errors.
The outside of the vial must be clean and dry, before starting the test. Wipe the vial with alint-free cloth to remove fingerprints or water drops.
If the vial has minor scratches or scuffs, add a few drops of silicone oil to outside of the vial. Wipe with lint-free cloth.
For the low turbidity samples (0 to200NTU), we recommend that you use the same be aligned with the arrow on the meter.
To avoid errors from ambient light interference, do not use the meter in bright sunlight. Always close the light shield lid during measurement and Calibration.
Avoid spillage of water in the sample chamber. It may cause damage to the meter.
Details:
Visit the AMTAST Store
Portable Turbidimeter Turbidity Meter Kit Turbidity Tester with 2 PCS Glass Sample Vials Range:0~1100 NTU/FNU, 0~275 EBC, 0~9999 ASBC
QAR2,18547
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of Qatar. Any items found to be restricted or prohibited for sale within the Qatar will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Qatar are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Similar suggestions by Bolo
Share with
Or share with link
https://www.bolo.qa/products/UO06KLAA99A
Visit the AMTAST Store
Portable Turbidimeter Turbidity Meter Kit Turbidity Tester with 2 PCS Glass Sample Vials Range:0~1100 NTU/FNU, 0~275 EBC, 0~9999 ASBC
QAR2,18547
Quantity:
Order today to get by 7-14 business days
This item qualifies for free delivery
Imported From: United States
At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.
Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.
Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.
If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.
Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.
While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.
Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.
BOLO operates in accordance with the laws and regulations of Qatar. Any items found to be restricted or prohibited for sale within the Qatar will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Qatar are listed on our website.
All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.
All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.
Description:
Measurement Range: 0~1100 NTU/FNU, 0~275EBC, 0~9999 ASBC
Resolution: 0.01(0~100 NTU), 0.1 (100~999NTU), 1 (999~1100 NTU)
Accuracy: ±2%(0~500 NTU), ±3% (501~1100NTU)
Default Calibration Standards: 0.02 NTU,200 NTU, 500 NTU, 1000 NTU or User-Defined
Light Source: Infrared-emitting diode (850nm wave length)
Detector: Silicon Photodiode
Stray Light:
Sample Vials: 60(H)×25(Dia)mm
Power Off: Manualor Automatic (15 minutes)
Reset Function: Yes
Memory: Stores up to 100 data sets
Output: USB Communication Interface
Operating Temperature: 0~60°C
Important Notes for Measurement and Calibration:
Do not hold the meter in the hand during measurement and calibration.
Glass vials and caps must be cleaned thoroughly with deionised water after each measurement. Minor residuals can cause errors.
The outside of the vial must be clean and dry, before starting the test. Wipe the vial with alint-free cloth to remove fingerprints or water drops.
If the vial has minor scratches or scuffs, add a few drops of silicone oil to outside of the vial. Wipe with lint-free cloth.
For the low turbidity samples (0 to200NTU), we recommend that you use the same be aligned with the arrow on the meter.
To avoid errors from ambient light interference, do not use the meter in bright sunlight. Always close the light shield lid during measurement and Calibration.
Avoid spillage of water in the sample chamber. It may cause damage to the meter.
Details:
Similar suggestions by Bolo
Share with
Or share with link
https://www.bolo.qa/products/UO06KLAA99A