Idatalink Blade-AL Universal Integration Transponder Bypass (ADS-BLADE AL) Web-Programmable Data Immobilizer Bypass Integration Cartridge.

This BLADE-AL bypass module acts as the middle man between your remote start and the vehicle's computer. This simple, yet powerful piece of hardware makes seamless remote start possible on modern cars, without sacrificing the factory security of your vehicle. Designed for hassle-free all-in-one immobilizer bypass, interface and CANbus integration, simply insert your ADS-BLADE AL cartridge into your Blade-enabled remote starter's dedicated dock, connect your remote starter to your PC using the Weblink Updater.

Universal 'all-in-one' integration cartridge. Web-programmable data immobilizer bypass and door lock integration for over 4000 vehicle models from 1997 to date including exclusive KLON firmware applications. Inserts directly in Blade-compatible remote start, vehicle security and convenience products for seamless integration.

Key Features:

• Universal 'all-in-one' integration cartridge - Integration for Over 4000 Vehicle Models
• Web-programmable data bypass and door-lock integration for over 4000 vehicle models from 1997 to date including exclusive KLON firmware applications
• Inserts directly in Blade-compatible remote start, vehicle security and convenience products for seamless integration.

What is a Bypass Module? A bypass module is a piece of hardware that allows the remote starter to get programmed to your vehicle.

This means, you can remote start your vehicle without disabling any of your vehicle’s features.

We all love remote starters. On a cold winter day, stepping outside to a fully defrosted and warm vehicle feels like magic. Several pieces of hardware make this magic possible. Aside from the Remote Starts control module itself, the most important piece of hardware is this BLADE-AL Bypass Module.

A Brief History of Remote Start & Immobilizers

A bypass module is what makes modern remote start possible. You see, since the year 2000, many vehicles were equipped with immobilizers. This device does wonders for vehicle security and theft prevention. However, they make the roles of remote start installers and manufacturers more complex.

In short, the immobilizer prevents the engine from starting without a key; making the car less vulnerable to theft. The transponder chip emits a unique signal that it sends to the antenna which is communicated to the vehicle’s computer. If the computer recognizes the signal, then it allows the vehicle to start and continue running.

* Programming Notes: BLADE INTEGRATION & FLASHING/PROGRAMMING

Insert your ADS-BLADE cartridge into your BLADE-enabled compatible remote starter's dedicated dock. Designed for optimal immobilizer bypass integration.

• "BLADE" Compatible Compustar Control Modules: CM-900, CM-900X, CM-X, CM7000-AS, CM7200-S, CM900-AS, CM900-S

Connect your remote starter with the inserted BLADE to Flash/Program via:

• "PC or Mac" using the Idatalink ADS-USB Weblink Updater Cable: Flash your module with any firmware available in the Idatalink BLADE-AL or BLADE-TB Idatalink application library. Download "Weblink" Desktop Software (Free) on Idatalink website. Click on "Weblink" located under the "Support" menu tab. Idatalink ADS-USB is required for this and sold separately.
• "Android" Idatalink ADS-WLM-AN1 Weblink Mobile. Flash/Program with your Android device connecting the ADS-WLM-AP1 into the compatible remote starter and vehicle's OBD Port.
• "IOS" Idatalink ADS-WLM-AP1 Weblink Mobile. Flash/Program with your IOS device connecting the ADS-WLM-AP1 into the compatible remote starter and vehicle's OBD Port.
• *Additional accessories may be required and sold separately.

What is "Weblink Desktop" Software?

USB via PC or Mac: The Weblink Desktop application allows you to flash all Idatalink, Idatastart and Idatalink Maestro products on a PC or Mac desktop computer with an internet connection – without using a web browser. To begin flashing, simply download the Weblink Desktop application, create an account, connect your device to a computer using the Idatalink ADS-USB Weblink USB Interface cable (sold separately), log into your Weblink account and follow the programming steps.

• (Download "Weblink" Desktop Software (Free) on Idatalink website. Click on "Weblink" located under the "Support" menu tab. Idatalink ADS-USB is required for this and sold separately.)

** Professional installation is highly recommended.

A bypass module is a piece of hardware that allows the remote starter to mimic your vehicle’s key.

When immobilizers were introduced, aftermarket remote starters had to be installed alongside one of your expensive vehicle keys, or the factory security features had to be disabled entirely. Then came the bypass module to bring back the magic of keyless entry and remote start.

Remember the unique signal emitted by the transponder chip we mentioned earlier? Well, when the dealer installs your remote car starter, they program the bypass module. This way, the bypass module will emit the same unique signal as the transponder chip in your car key.

One of the most impressive aspects of the bypass module is that it allows you to maintain all of the original factory security features of your vehicle. Since the device emits the transponder’s signal, there’s no need to disconnect any of the factory anti-theft features to make the remote starter work.

So you see, this BLADE-AL bypass module acts as the middle man between your remote start and the vehicle’s computer. This simple, yet powerful piece of hardware makes seamless remote start possible on modern cars, without sacrificing the factory security of your vehicle.

Compustar remote starters are compatible with bypass modules made by Idatalink, like the ADS-ALCA, BLADE-AL or BLADE-TB (pictured above inserted into a BLADE-enabled compatible remote starter's dedicated dock). Compustar has maintained a close partnership with Idatalink for many years, and continue to rely on their state-of-the-art hardware to make our remote starters better than ever! The type of bypass module installed with your system depends on a couple of factors: your vehicle make, model, the type of system, and your installer.

If your vehicle was manufactured after the year 2000 and your key has a transponder, then YES you do need a bypass module for remote start. If you’re not sure if your vehicle falls into this category (and it likely does) don’s worry, your installer will be able to advise you.

Bypass modules are truly fascinating pieces of hardware that make modern remote starters possible! If you’re looking for the best remote starter in the industry, look no further than Compustar. Their award-winning systems are reliable and powerful.

What Hardware Does Compustar Use?

Compustar remote starters are compatible with bypass modules made by Idatalink, like the ADS-ALCA and the Blade AL (pictured above inserted into a BLADE-enabled compatible remote starter's dedicated dock). Compustar has maintained a close partnership with Idatalink for many years, and continue to rely on their state-of-the-art hardware to make our remote starters better than ever! The type of bypass module installed with your system depends on a couple of factors: your vehicle make, model, the type of system, and your installer. Before having your system installed, ask your Authorized Compustar Dealer about the type of hardware they plan to use to learn more.

If your vehicle was manufactured after the year 2000 and your key has a transponder, then YES you do need a bypass module for remote start. If you’re not sure if your vehicle falls into this category (and it likely does) don’s worry, your installer will be able to advise you.

Bypass modules are truly fascinating pieces of hardware that make modern remote starters possible! If you’re looking for the best remote starter in the industry, look no further than Compustar. Their award-winning systems are reliable and powerful.

* Programming Notes: BLADE INTEGRATION & FLASHING/PROGRAMMING

Insert your ADS-BLADE cartridge into your BLADE-enabled compatible remote starter's dedicated dock. Designed for optimal immobilizer bypass integration.

• "BLADE" Compatible Compustar Control Modules: CM-900, CM-900X, CM-X, CM7000-AS, CM7200-S, CM900-AS, CM900-S

Connect your remote starter with the inserted BLADE to Flash/Program via:

• "PC or Mac" using the Idatalink ADS-USB Weblink Updater Cable: Flash your module with any firmware available in the Idatalink BLADE-AL or BLADE-TB Idatalink application library. Download "Weblink" Desktop Software (Free) on Idatalink website. Click on "Weblink" located under the "Support" menu tab. Idatalink ADS-USB is required for this and sold separately.
• "Android" Idatalink ADS-WLM-AN1 Weblink Mobile. Flash/Program with your Android device connecting the ADS-WLM-AP1 into the compatible remote starter and vehicle's OBD Port.
• "IOS" Idatalink ADS-WLM-AP1 Weblink Mobile. Flash/Program with your IOS device connecting the ADS-WLM-AP1 into the compatible remote starter and vehicle's OBD Port.
• *Additional accessories may be required and sold separately.

What is "Weblink Desktop" Software?

USB via PC or Mac: The Weblink Desktop application allows you to flash all Idatalink, Idatastart and Idatalink Maestro products on a PC or Mac desktop computer with an internet connection – without using a web browser. To begin flashing, simply download the Weblink Desktop application, create an account, connect your device to a computer using the Idatalink ADS-USB Weblink USB Interface cable (sold separately), log into your Weblink account and follow the programming steps.

• (Download "Weblink" Desktop Software (Free) on Idatalink website. Click on "Weblink" located under the "Support" menu tab. Idatalink ADS-USB is required for this and sold separately.)

** Professional installation is highly recommended.