Deliver toQatar
3D Printer Adhesive Glue Bed Weld Original, Strong Grip Reduces Warping for ABS, ASA, PLA, and PETG Filament on Compatible Heated Build Plates, 118ml, 4 fl oz

Description:

  • THERMAL DYNAMIC COATING - Based on science, works like magic; Parts stick at hot and release when cooled; Check compatibility image for your surface type
  • LONG LASTING - Print several times on a single coating; recharge with a wet sponge to get more prints out of a single application; Cost pennies per print
  • LOW ODOR & WATER SOLUBLE - No harsh smells; No headaches; Easy to touch up or remove with water
  • NO-MESS APPLICATOR - Built in foam tip makes applying the coating to your build plate surface simple and it won't accidentally spill
  • 90-DAY MANUFACTURER GUARANTEE - If this solution does not work for your 3D printing application, you have a FULL 3 MONTHS to contact us for a 100% money-back refund

  • Do you have trouble with parts warping or coming detached from the printer bed?

    Have you struggled with part removal after your print is finished?

    INTRODUCING BED WELD - ORIGINAL

    BED WELD was engineered to solve these challenges by enhancing your print surface so that it grabs hold of that critical first layer when your build surface is hot, and refuses to let go with its gecko like grip. In many cases you can often print without rafts or build plate adhesion layers, saving you time and material.

    Once your print is done the coating dynamically morphs as your printer bed cools, and releases its hold so you don't have to wrestle to get your part off.

    No more chipped glass or broken parts. In most cases, your part will fully detach without the need for tools. If your part does remain attached it normally takes just a simple lifting of a corner using the edge of a razor, and the part easily pops off.

    BED WELD comes with a unique applicator that makes applying the coating a simple no mess process. The coating dries quickly to form a thin film that is not sticky, so there is no risk of getting a clogged nozzle or having residue on your finished part.

    NOTE: The BED WELD coating was designed for use with heated build plates made from glass. It was optimized to work with PLA, ABS, PETG, ASA, and CPE filaments. BED WELD is not recommended for use with Nylon, PP, or TPU 95A. See image for compatibility summary.

    Applying to glass build plates is preferred. Flexible spring steel plates are not currently supported.

    Do not apply BED WELD directly to aluminum bed surfaces. First, place a layer of Kapton tape over the aluminum bed surface and apply BED WELD on top of the Kapton.

    When printing with ABS we recommend setting your bed temperature no higher than 80C.

    BED WELD is backed by an unconditional 90-Day money back manufacturers guarantee so you risk nothing!

    Details:

    3D Printer Adhesive Glue Bed Weld Original, Strong Grip Reduces Warping for ABS, ASA, PLA, and PETG Filament on Compatible Heated Build Plates, 118ml, 4 fl oz

    Product ID: KO079984TI5
    |

    Returns & Warranty policies

    Imported From: United Kingdom

    At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.

    Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.

    Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.

    If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.

    Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.

    While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.

    Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.

    BOLO operates in accordance with the laws and regulations of Qatar. Any items found to be restricted or prohibited for sale within the Qatar will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Qatar are listed on our website.

    All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.

    All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.

    3D Printer Adhesive Glue Bed Weld Original, Strong Grip Reduces Warping for ABS, ASA, PLA, and PETG Filament on Compatible Heated Build Plates, 118ml, 4 fl oz

    Product ID: KO079984TI5
    3D Printer Adhesive Glue Bed Weld Original, Strong Grip Reduces Warping for ABS, ASA, PLA, and PETG Filament on Compatible Heated Build Plates, 118ml, 4 fl oz-0
    |

    Returns & Warranty policies

    Imported From: United Kingdom

    At BOLO, we work hard to ensure the products you receive are new, genuine, and sourced from reputable suppliers.

    Every product in the BOLO catalogue is sourced through our Verified Global Supply Network of verified sellers, authorized distributors or directly from the manufacturer.

    Each product undergoes thorough inspection and verification at our consolidation and fulfilment centers to ensure it meets our strict authenticity and quality standards before being shipped and delivered to you.

    If you ever have concerns regarding the authenticity of a product purchased from us, please contact Bolo Support. We will review your inquiry promptly and, if necessary, provide documentation verifying authenticity or offer a suitable resolution.

    Your trust is our top priority, and we are committed to maintaining transparency and integrity in every transaction.

    While we strive to display accurate information, variations in packaging, labeling, instructions, or formulation may occasionally occur due to regional differences or supplier updates. For detailed or manufacturer-specific information, please contact the brand directly or reach out to BOLO Support for assistance.

    Unless otherwise stated, all prices displayed on the product page include applicable taxes and import duties.

    BOLO operates in accordance with the laws and regulations of Qatar. Any items found to be restricted or prohibited for sale within the Qatar will be cancelled prior to shipment. We take proactive measures to ensure that only products permitted for sale in Qatar are listed on our website.

    All items are shipped by air, and any products classified as “Dangerous Goods (DG)” under IATA regulations will be removed from the order and cancelled.

    All orders are processed manually, and we make every effort to process them promptly once confirmed. Products cancelled due to the above reasons will be permanently removed from listings across the website.

    Description:

  • THERMAL DYNAMIC COATING - Based on science, works like magic; Parts stick at hot and release when cooled; Check compatibility image for your surface type
  • LONG LASTING - Print several times on a single coating; recharge with a wet sponge to get more prints out of a single application; Cost pennies per print
  • LOW ODOR & WATER SOLUBLE - No harsh smells; No headaches; Easy to touch up or remove with water
  • NO-MESS APPLICATOR - Built in foam tip makes applying the coating to your build plate surface simple and it won't accidentally spill
  • 90-DAY MANUFACTURER GUARANTEE - If this solution does not work for your 3D printing application, you have a FULL 3 MONTHS to contact us for a 100% money-back refund

  • Do you have trouble with parts warping or coming detached from the printer bed?

    Have you struggled with part removal after your print is finished?

    INTRODUCING BED WELD - ORIGINAL

    BED WELD was engineered to solve these challenges by enhancing your print surface so that it grabs hold of that critical first layer when your build surface is hot, and refuses to let go with its gecko like grip. In many cases you can often print without rafts or build plate adhesion layers, saving you time and material.

    Once your print is done the coating dynamically morphs as your printer bed cools, and releases its hold so you don't have to wrestle to get your part off.

    No more chipped glass or broken parts. In most cases, your part will fully detach without the need for tools. If your part does remain attached it normally takes just a simple lifting of a corner using the edge of a razor, and the part easily pops off.

    BED WELD comes with a unique applicator that makes applying the coating a simple no mess process. The coating dries quickly to form a thin film that is not sticky, so there is no risk of getting a clogged nozzle or having residue on your finished part.

    NOTE: The BED WELD coating was designed for use with heated build plates made from glass. It was optimized to work with PLA, ABS, PETG, ASA, and CPE filaments. BED WELD is not recommended for use with Nylon, PP, or TPU 95A. See image for compatibility summary.

    Applying to glass build plates is preferred. Flexible spring steel plates are not currently supported.

    Do not apply BED WELD directly to aluminum bed surfaces. First, place a layer of Kapton tape over the aluminum bed surface and apply BED WELD on top of the Kapton.

    When printing with ABS we recommend setting your bed temperature no higher than 80C.

    BED WELD is backed by an unconditional 90-Day money back manufacturers guarantee so you risk nothing!

    Details: